Tyre Inflator Twin Closed End

These Twin Hold-on Connectors are suitable for inflation of twin tyres.

There are two types of connector. It is therefore important when purchasing connectors to specify whether a closed or open end type is required.

A Closed End connector is used when air is supplied directly from a main air line (i.e. compressor or air receiver).

A closed end air inflator does not require a trigger, a non-return valve unseats on connection to the tyre's valve allowing air to flow into the tyre.

The handles on these connectors are red in colour.

A closed end air inflator does not require a trigger

nless connected to a trigger etc.

Tyre Inflator Twin Closed End

These Twin Hold-on Connectors are suitable for inflation of twin tyres.

There are two types of connector. It is therefore important when purchasing connectors to specify whether a closed or open end type is required.

A Closed End connector is used when air is supplied directly from a main air line (i.e. compressor or air receiver).

A closed end air inflator does not require a trigger, a non-return valve unseats on connection to the tyre's valve allowing air to flow into the tyre.

The handles on these connectors are red in colour.

A closed end air inflator does not require a trigger

nless connected to a trigger etc.